SKU: 53cb7dd2d972 Categories: ,



The Remington Model 1100 is a semi-automatic 12-gauge shotgun that combines an autoloader’s versatility with the handling of a double-barrel. It is a true American classic that’s been trusted for decades. This Model 1100 has a 3″ chamber, cylinder choke bore barrel, iron sights, and a Simmons 1.5-5×20 Pro Diamond scope with mount. Two extra barrels are also included; 28″ fixed modified choke and a Hasting ventilated rib with three choke tubes (improved cylinder, modified, and full). A wrench is also included. Overall, this Model 1100 is in very good condition. There are marks on the wood, minor marks on the barrels, and a scratch on the left side of the receiver that extends into the buttstock.

UPC GDC0000103487
Gauge 12 GA
Capacity 5 ROUNDS
Barrel Length 22 BARREL
Weight 7.6 LBS.
Finish BLACK

The Remington Model 11-48 is a semi-automatic shotgun manufactured by Remington Arms as the first of its “new generation” semi-automatics produced after World War II.[1] Released as the replacement for the Remington Model 11, it was manufactured from 1949 to 1968 and was produced in 12, 16, 20 and 28 gauge and .410 variations.

The Model 11-48 is a long-recoil operated semi-automatic shotgun based on the Model 11, itself based on an 1898 design by John Browning. Shells are stored in a tubular magazine under the barrel. When a chambered shell is fired, the barrel and bolt recoiling together (for a distance greater than the shell length) re-cock the hammer, eject the spent shell, and feed another shell from the magazine into the action.

The Model 11-48 was revolutionary in that it ushered in stamped steel components for a lower cost of assembly, and featured truly interchangeable parts not requiring fitting by a gunsmith, and was reliable in the extreme. The impact of these changes can be seen on every Remington shotgun since, and is also prevalent on competitor’s models. The Model 11-48 differs from the Model 11 in the shape of its machined steel receiver and the use of less expensive stamped steel internal parts. The easily removable aluminum trigger housing was also featured on its successors.

Like the Model 11, the gun operated by way of two return springs. The first, located in the buttstock, serves as the resistance to the bolt. The second spring, located over the magazine tube, serves as the barrel recoil spring, allowing the barrel to recoil several inches into the receiver. The 11-48 differs from the Model 11 in the friction ring placed at the forward end of the barrel recoil spring. The Model 11 had a brass friction ring with one blunt end and one beveled end. The ring fit into a corresponding cut in the barrel underlug. For heavy loads, the ring was turned with the beveled end facing the lug. For lighter loads, the blunt end was turned to face the lug. The 11-48 features a similar friction ring system but is modified to be self-adjusting so as to work with all loads.

In 1956, Remington introduced the gas-operated Model 58, which proved more expensive to make than the Model 11-48, and was also less reliable and heavier. Remington chose to replace the Model 58 with a model that combined its best features with those of the Model 11-48. The resulting Model 1100 introduced in 1963 immediately replaced the Model 58 and proved so successful that it soon also replaced the Model 11-48.